Product mark example:
Product modifications by request
Contact us via our emailu.
The construction kit of the Quattro type is built on a time-tested construction of four circular cross-section posts that are connected to one another by means of horizontal rectangle-shaped crosspieces and two circular cross-section bars. The bars are fitted onto the crosspieces to form H-shaped levels. The crosspieces are mounted into the posts with only a small difference compared to the Triangel2 rack: only two crosspieces are fitted into the posts, subsequently connected to one another by means of bars.
In comparison to Triangel2, the Quattro type rack is constructed differently. The frame of the rack is based on four customized and optimised posts (similarly to Triangel2) that are connected to one another by means of rectangular frames. The frames are composed of two rectangular crosspieces and two bars. The type of anchoring is identical to that of the Triangel2 model. Although this type of rack is not as stable or horizontally balanced as Triangel2, it is more suitable for electronics requiring more depth since the back of the structure is open (as opposed to Triangel2, where the rear post is located right in the middle of the horizontal crosspieces). The standard distance between the posts in the case of Quattro is 500mm.